Paramhans Industry

Nexaweld Welding Electrode Cast Iron (CI) -Nickel 50% NEXA – FN50 Size(2.5/3.15/4/5mm*450)

Unit of Measurement 400gm  / 43

Price : 170/kg Exclusive of GST

Nexaweld Gouging Welding Electrode Nexa Gouge Size(2.5/3.15/4/5mm*450)

Nexaweld Nexa Gouge is a super heavy-coated gouging electrode specially designed for efficient chamfering, gouging, and metal removal without the need for auxiliary gas, oxygen, or special torches. It offers excellent control, smooth arc action, and precise gouging performance on a wide range of metals, making it ideal for both fabrication and repair jobs.

• No need for gas, air, or special gouging equipment
• Clean, controlled gouging and chamfering
• High metal removal rate with minimal spatter
• Works on ferrous and non-ferrous metals
• Easy to use in all positions

Perfect for back gouging, crack removal, edge preparation, cleaning risers and fins, eliminating casting defects like sand pockets, and removing excess metal before final machining. Widely used in foundries, fabrication workshops, shipyards, and heavy industries.

Unit of Measurement 400gm  / 65rs

Price : 260/kg Exclusive of GST

Nexaweld Stainless Steel Welding Electrode E-309L Size(2.5/3.15/4/5mm*450)

Nexaweld E-309L is a high-quality stainless steel welding electrode engineered for all-position welding. It deposits a 25/12 Cr-Ni alloy, providing exceptional resistance to heat, oxidation, and chemical corrosion. With a stable arc, low spatter, smooth weld profile, and easy slag removal, it delivers radiographic-quality welds—ideal for critical welding applications and dissimilar metal joints.

• 25/12 Cr-Ni deposit with superior chemical and heat resistance
• Smooth and stable arc for clean, controlled welds
• Low spatter and easy slag removal
• Radiographic-quality welds up to 1100°C
• Suitable for welding in all positions

Perfect for welding stainless steel to carbon or low alloy steels, including AISI 309 and overlaying mild steel surfaces. Commonly used in the chemical industry, furnace manufacturing, power plants, cladded steel fabrication, and dissimilar metal joining tasks that demand strong, corrosion-resistant welds.

Unit of Measurement 400gm  / 205rs

Nexaweld Stainless Steel Welding Electrode E-307 Size(2.5/3.15/4/5mm*450)

Price : inclusive of GST

Nexaweld Hard-3 Hard Facing Welding Electrode 450–540 BHN Size(2.5/3.15/4/5mm*450)

Nexaweld Hard-2 Hard Facing Welding Electrode 340–410 BHN Size(2.5/3.15/4/5mm*450)

Nexaweld Hard-2 is a high-performance hardfacing welding electrode designed for mild steel, carbon steel, and low alloy steel components requiring surface hardness between 340–410 BHN. The weld deposit offers exceptional resistance to abrasive wear while retaining good toughness, making it suitable for demanding industrial applications. The deposit is machinable using carbide tools, ensuring post-weld precision.

• Delivers 340–410 BHN hardness for enhanced wear resistance
• Ideal for surfacing mild, carbon, and low alloy steels
• Excellent abrasion resistance with good impact toughness
• Machinable with carbide tools
• Stable arc, smooth weld bead, and easy slag removal

Recommended for surfacing and rebuilding of couplings, cog wheels, cold punching dies, rail ends and crossings, steel castings, and other wear-prone parts. Widely used in mining, forging, railways, and heavy machinery maintenance.

Unit of Measurement 400gm  / 58rs

Price : 230/kg Exclusive of GST

Nexaweld Alloys Non Machineable Cast Iron Electrodes NEXA-NM Size(2.5/3.15/4/5mm*450)

Nexaweld NEXA-NM is a graphite-based, medium-heavy coated welding electrode with a mild steel core, specifically designed for non-machinable welds on cast iron. It offers a steady, quiet arc, ensures strong fusion with the base metal, and features easy slag removal—making it ideal for repair and reclamation work where machinability is not required.

• Designed for non-machinable welds on cast iron
• Graphite-based coating ensures smooth operation
• Excellent fusion and crack resistance
• Self-detaching slag for cleaner post-weld finish
• Good colour matching with cast iron surfaces

Perfect for general repair and reclamation of cast iron parts, including joining cast iron to mild steel. Commonly used in automobile repairs, machinery maintenance, and foundry works where machinability is not a concern.

Unit of Measurement 400gm  / 45rs

Price : 178/kg Exclusive of GST

Nexaweld Low Hydrogen Welding Electrode E-8018-B2 Size(2.5/3.15/4/5mm*450)

Nexaweld E-8018-B2 is a premium low hydrogen, basic-coated electrode specially designed for welding creep-resistant steels containing 1.25% Chromium and 0.5% Molybdenum. It offers excellent mechanical strength, high-temperature performance, and radiographic-quality welds. The electrode delivers superior creep resistance up to 550°C, making it ideal for critical, high-pressure applications.

Key Features:

• Basic-coated, low hydrogen electrode for heat-resistant steels
• Superior creep strength up to 550°C
• Radiographic-quality weld metal with excellent mechanical properties
• Smooth arc performance and low spatter
• Suitable for both AC and DC welding

Applications:

Ideal for welding 1.25 Cr - 0.5 Mo and 1 Cr - 0.5 Mo steels used in high-temperature, high-pressure environments. Commonly used in refineries, thermal power plants, chemical plants, pressure vessels, superheater tubes, steam pipelines, and boiler headers. Trusted for its durability in demanding conditions and long-term reliability.

Unit of Measurement 400gm  / 59rs

Price : 234/kg Exclusive of GST

Nexaweld Stainless Steel Welding Electrode E-316L Size(2.5/3.15/4/5mm*450)

Nexaweld E-316L is a premium quality, rutile-coated stainless steel welding electrode with extra low carbon content. Designed for all-position welding, it delivers an 18/12/2.3 Mo weld deposit that offers excellent resistance to corrosion, heat, and cracking. The electrode produces a stable arc, low spatter, and smooth bead profile with easy slag removal—ideal for precision fabrication in corrosive environments.

• Extra low carbon for superior intergranular corrosion resistance
• 18/12/2.3 Mo alloy for high resistance to acids and chlorides
• Smooth arc with minimal spatter
• Easy slag detachability and clean weld finish
• Radiographic-quality welds with excellent mechanical properties
• Enhanced creep resistance for high-temperature applications

Recommended for welding AISI 316L stainless steels. Widely used in industries such as chemicals, dyes and paints, pharmaceuticals, and fertilizers—especially where corrosion resistance and hygiene are critical. Suitable for tanks, piping, process equipment, and components exposed to aggressive environments.

Unit of Measurement 400gm  / 205rs

Price : 820/kg Exclusive of GST

Nexaweld Mild Steel Welding Electrode E-7024 Size(2.5/3.15/4/5mm*450)

Unit of Measurement 400gm  / 43

Price : 170/kg Exclusive of GST

Nexaweld Mild Steel Welding Electrode E-6013S Size(2.5/3.15/4/5mm*450)

Nexaweld E-6013S is a heavy rutile-coated mild steel welding electrode specially designed to deliver high-quality welds with a superior finish and radiographic clarity. It features low spatter, excellent arc stability, and a self-lifting slag that ensures clean, efficient welds with minimal effort. With smooth arc striking and easy re-striking, this electrode supports fast, consistent welding performance—ideal for both light and medium fabrication work.

Key Features:

• Heavy rutile coating for excellent arc control
• Smooth arc with low spatter for clean welding
• Self-releasing slag for faster post-weld cleanup
• Easy arc striking and re-striking
• Fine droplet transfer—ideal for thin steel sheets
• Works in all welding positions with AC or DC supply

Applications:
Nexaweld E-6013S is widely used in:

• Wagon and coach building
• Locomotive fabrication
• Auto component manufacturing
• Pipeline welding
• Steel furniture production
• Thin sheet metal welding

A reliable choice for industries that demand precision, speed, and high weld quality.

Unit of Measurement 400gm  / 45rs

Price : 180/kg Exclusive of GST

Nexaweld Mild Steel Welding Electrode E-6013+ Size(2.5/3.15/4/5mm*450)

Nexaweld E6013 is a high-quality, medium-coated rutile type welding electrode designed for all-position welding. It offers a smooth and stable arc, minimal spatter, easy slag removal, and a clean, uniform weld bead. The electrode ensures radiographic quality welds with excellent chemical and mechanical strength—ideal for high-standard fabrication work.

Key Features:

Medium rutile coating for ease of use

Smooth arc and low spatter, even for beginners

Clean slag detachment and fine bead appearance

Radiographic-quality weld deposits

Consistent performance in all welding positions

Applications:

Widely used in general fabrication, structural steel work, truck and trailer manufacturing, shipbuilding, pipe welding, and storage tank assembly. A reliable choice for industries that require strong, clean welds and fast operations.

Unit of Measurement 400gm  / 43

Price : 170/kg Exclusive of GST

Nexaweld Hard-3LH Hard Facing Welding Electrode 560–600 BHN Size(2.5/3.15/4/5mm*450)

Nexaweld Hard-3LH is a heavy-duty, basic-coated hardfacing electrode engineered for high-impact, high-abrasion environments. It produces an exceptionally hard, air-hardening weld deposit with a hardness of 560–600 BHN. Specially designed for restoring and building up worn-out machine parts, this electrode delivers superior resistance to wear and impact under the most extreme service conditions. Please note: the deposit is non-machinable and should be limited to a maximum of 3 layers. For difficult steels or carbon steels, use a cushioning layer with Nexaweld P-401.

• Extreme hardness: 560–600 BHN for high-wear surfaces
• Outstanding resistance to impact and severe abrasion
• Air-hardening, non-machinable weld metal
• Recommended for maximum 3-layer build-up
• Suitable for use with a cushioning layer on tough base metals

Ideal for hardfacing of metal cutting and forming tools, shears, croppers, oil expellers, cane cutting knives, conveyor buckets, mixer blades, and other components exposed to intense wear and shock loads. Widely used in steel plants, sugar mills, cement, and heavy machinery industries.

Unit of Measurement 400gm  / 83rs

Price : 330/kg Exclusive of GST

Nexaweld Low Hydrogen Welding Electrode E-7018-G  Size(2.5/3.15/4/5mm*450)

Nexaweld E-7018-G is a premium low hydrogen, iron powder electrode specifically developed for welding fine-grained steels in critical structural applications. It delivers radiographic-quality welds with exceptional ductility and high impact strength, even at sub-zero temperatures as low as -50°C. This electrode performs reliably on heavy sections and highly restrained joints where toughness and fracture resistance are vital.

Key Features:

• Low hydrogen, iron powder electrode for fine-grained steels
• Radiographic-quality welds with excellent ductility
• Superior impact strength at low temperatures (down to -50°C)
• Ideal for heavy and restrained joints
• Consistent performance in all welding positions (AC/DC)

Applications:

Perfect for welding pipelines, pressure vessels, and heavy structural components in industries where low-temperature performance and high fracture resistance are essential. Commonly used in infrastructure, energy, petrochemical, and fabrication sectors.

Unit of Measurement 400gm  / 00                                                             Price : 00/kg Exclusive of GST

Nexaweld Low Hydrogen Welding Electrode E-9018-G Size(2.5/3.15/4/5mm*450)

Nexaweld E-9018-G is a high-quality, basic-coated low hydrogen electrode with iron powder content, specifically formulated for welding high tensile and grain-refined steels. It delivers tough, crack-resistant welds with excellent notch toughness—even at sub-zero temperatures down to -50°C. Ideal for demanding structural applications requiring strength, durability, and reliability.

Key Features:

• Low hydrogen, iron powder electrode for high tensile steels
• Exceptional crack resistance and weld toughness
• Maintains high impact strength at temperatures as low as -50°C
• Radiographic-quality welds with smooth arc and low spatter
• Consistent performance on AC and DC power sources

Applications:

Perfect for welding pressure vessels, penstocks, tanks, bridges, heavy machinery, and steel structures made from high tensile, quenched & tempered (Q&T), and grain-refined steels. Widely used in infrastructure, construction, hydro projects, and critical fabrication industries.

Unit of Measurement 400gm  / 85rs

Price : 340/kg Exclusive of GST

Nexaweld Stainless Steel Welding Electrode E-347 Size(2.5/3.15/4/5mm*450)

Unit of Measurement 400gm  / 43

Price : 170/kg Exclusive of GST

Nexaweld Hard-MN Hard Facing Welding Electrode Size(2.5/3.15/4/5mm*450)

Nexaweld Hard-MN is a medium-coated, basic type hardfacing welding electrode specifically designed for reconditioning and rebuilding austenitic manganese steel components. The weld deposit contains 12–14% manganese and offers excellent resistance to wear and deformation under severe impact conditions. Ideal for extending the life of high-impact industrial parts, especially in crushing and grinding operations.

• Specially designed for austenitic manganese steel (12–14%)
• Excellent impact and abrasion resistance
• Suitable for heavy-duty reconditioning and surfacing jobs
• Sound welds with tough, crack-resistant deposit
• Compatible with AC and DC welding

Best suited for rebuilding and surfacing of crusher jaws, manganese steel rail crossovers, cement grinder rings, austenitic manganese steel castings, hammers, and other high-impact wear parts. Widely used in mining, cement, quarrying, and heavy industrial sectors.

Unit of Measurement 400gm  / 58rs

Price : 230/kg Exclusive of GST

Nexaweld LIGHT COATED ELECTRODE For Welding of COPPER & BRONZE Size(2.5/3.15/4/5mm*450)

Nexaweld E-CuSn-A is a light-coated, high-performance bronze welding electrode designed specifically for welding copper, bronze, and dissimilar metals. It produces a porosity-free, fully machinable weld deposit and is also suitable for cladding operations. No preheating is needed when welding cast iron, unless machinability is required—making it an efficient and versatile choice for many industrial applications.

• Smooth arc with minimal spatter
• Fully machinable and porosity-free welds
• Excellent for dissimilar metal joining
• Suitable for use without preheat on cast irons
• Ideal for cladding and build-up applications

Perfect for the repair and fabrication of valve seats, ship propellers, impeller blades, malleable iron parts, and for joining dissimilar metals like mild steel, brass, and phosphorus bronze. Widely used in marine engineering, pump repair, and heavy machinery maintenance.

Unit of Measurement 400gm  / 625rs

Price : 2500/kg Exclusive of GST

Nexaweld Hard-1 Hard Facing Welding Electrode 210–280 BHN Size(2.5/3.15/4/5mm*450)

Nexaweld Hard-1 is a medium-coated, rutile-type hardfacing welding electrode designed for superior wear resistance and durability. It deposits an air-hardening carbon-chromium alloy with high toughness, excellent resistance to rolling and sliding friction, and strong impact load handling. The weld metal is also machinable, making it ideal for repair and build-up applications where precision is essential.

Key Features:

• Hardfacing electrode with 210–280 BHN hardness
• Air-hardening carbon-chromium alloy weld deposit
• Excellent resistance to wear, friction, and heavy impact
• Machinable weld metal for precision surfacing and repair
• Suitable for AC and DC welding

Applications:

Ideal for surfacing and repair of components exposed to heavy wear and impact such as tram tyres, pinion teeth, couplings, sugarcane crushers, hammers, rail points, and crossings. Widely used in the sugar, railway, mining, and heavy engineering industries.

Unit of Measurement 400gm  / 68rs

Price : 270/kg Exclusive of GST

Nexaweld Alloys Welding Electrode NEXA E-NiCrFe3 Size(2.5/3.15/4/5mm*450)

Unit of Measurement 400gm  / 43

Price : 170/kg Exclusive of GST

Nexaweld Low Hydrogen Welding Electrode E-7018 A-1 Size(2.5/3.15/4/5mm*450)

Nexaweld E-7018 A1 is a medium-heavy coated, low hydrogen iron powder electrode designed for welding creep-resistant Carbon-Molybdenum steels. It provides strong, crack-resistant welds that maintain excellent mechanical properties at elevated temperatures up to 525°C. With radiographic-quality weld deposits and suitability for all-position welding, this electrode ensures reliable performance in high-pressure, high-temperature applications.

Key Features:

• Low hydrogen, iron powder electrode for Carbon-Mo steels
• Withstands service temperatures up to 525°C
• Radiographic-quality welds with excellent creep resistance
• Stable arc with smooth bead appearance and easy slag removal
• Suitable for all-position welding on AC and DC

Applications:

Ideal for welding pressure pipelines, boiler tanks, and boiler plates made from creep-resistant steels. Widely used in power plants, refineries, and industries requiring dependable high-temperature welds on structural components and pressure equipment.

Unit of Measurement 400gm  / 60rs

Price : 240/kg Exclusive of GST

Nexaweld Low Hydrogen Welding Electrode E-7018 Size(2.5/3.15/4/5mm*450) 

Nexaweld E-7018 is a premium low hydrogen, iron powder type welding electrode engineered for high-strength structural applications. It is specifically designed for welding heavy, restrained joints exposed to dynamic loads and impacts. This electrode provides tough, ductile weld deposits of radiographic quality with an impressive deposition efficiency of approximately 115%, ensuring high productivity and weld integrity.

• Low hydrogen, iron powder electrode for crack-resistant welds
• High deposition efficiency (~115%) for faster job completion
• Tough and ductile weld metal with radiographic quality
• Excellent performance on heavy and restrained joints
• Suitable for AC and DC welding

Ideal for structural welding in high-stress environments such as boilers, pressure vessels, earthmoving equipment, heavy-duty fabrication, and dynamic load-bearing assemblies. A preferred choice for welding critical joints in infrastructure, heavy machinery, and industrial manufacturing.

Unit of Measurement 400gm  / 45rs 

Price : 178/kg Exclusive of GST

Nexaweld Stainless Steel Welding Electrode E-310 Size(2.5/3.15/4/5mm*450)

Unit of Measurement 400gm  / 43

Price : 170/kg Exclusive of GST

Nexaweld Stainless Steel Welding Electrode E-410-15 Size(2.5/3.15/4/5mm*450)

Nexaweld E-410-15 is a high-performance, basic-coated low hydrogen electrode specially formulated for depositing 13% Chromium weld metal. It offers excellent resistance to oxidation, corrosion, and wear—making it ideal for surfacing and repair applications where durability and corrosion protection are critical. This electrode ensures stable arc performance, minimal spatter, and strong metallurgical bonding.

• Low hydrogen, basic-coated electrode for strong, crack-resistant welds
• 13% Chromium deposit for enhanced corrosion and oxidation resistance
• Stable arc with smooth weld profile
• Excellent for hard-facing and component rebuilding
• Compatible with both AC and DC welding

Ideal for surfacing and joining components exposed to wear and corrosion in industries like chemicals, petroleum, and power generation. Widely used for welding AISI 410/420 and equivalent steels (14000, 14002, 14006, 14021), as well as for valve seats, steam turbine blades, and other high-stress parts.

Unit of Measurement 400gm  / 110rs

Price : 440/kg Exclusive of GST

. Nexaweld Mild Steel Welding Electrode E-6013+ Size(2.5/3.15/4/5mm*450)

Nexaweld E6013+ is a high-quality, medium-coated rutile type mild steel welding electrode engineered for all-position welding, including vertical down. It delivers a smooth, stable arc with minimal spatter, excellent slag removal, and a neat, uniform weld bead. Known for producing radiographic-quality welds, it offers superior mechanical and chemical strength—perfect for demanding fabrication environments.

Key Features:

• Medium rutile coating for stable arc and ease of operation
• Smooth arc flow with low spatter—suitable even for less experienced welders
• Easy slag removal and excellent bead profile
• Produces radiographic-quality welds
• Performs consistently in all welding positions (flat, vertical, overhead, etc.)
• Works well on both AC and DC power sources

Applications:

Ideal for general and heavy fabrication, Nexaweld E6013+ is widely used in:

• Structural steel fabrication
• Shipbuilding and marine repairs
• Railway wagons and transport vehicles
• Storage tanks and pressure vessels
• Pipe welding and boiler tube assembly

A dependable solution for industries requiring strong, clean, and high-speed welds.

Unit of Measurement 400gm  / 43rs

Nexaweld Mild Steel Welding Electrode E-6013SS Size(2.5/3.15/4/5mm*450)

Nexaweld E-6013SS (X-104) is a super heavy-coated, iron powder rutile type welding electrode engineered for high-speed, high-efficiency welding. Designed for easy handling and smooth operation, it delivers radiographic-quality welds with excellent metallurgical cleanliness. Operating at high current, this electrode ensures high metal deposition rates with metal recovery exceeding 150%, making it an excellent choice for time-sensitive and large-scale fabrication tasks.

Key Features:

• Super heavy rutile and iron powder coating
• Smooth arc and stable operation at high current
• Radiographic-quality, clean weld metal
• High deposition rate for increased productivity
• Over 150% metal recovery
• Ideal for down-hand and horizontal fillet welding

Applications:
Perfect for heavy-duty industrial use, Nexaweld E-6013SS is widely used in:

• Heavy steel castings and structural fabrication
• Shipbuilding and marine industries
• Locomotive and railway fabrication
• Girders and bridge construction
• Boiler manufacturing
• General heavy fabrication in mild steel

Built for speed, strength, and superior weld quality—Nexaweld E-6013SS is the professional's choice for high-output welding.

Unit of Measurement 400gm  / 48rs

Price : 190/kg Exclusive of GST

Nexaweld Low Hydrogen Welding Electrode E-7018-1 Size(2.5/3.15/4/5mm*450)

Nexaweld E-7018-1 is a top-grade low hydrogen welding electrode specifically developed for demanding applications requiring exceptional weld quality and crack resistance. Engineered for structural and pressure applications, it produces radiographic-quality welds and offers outstanding toughness—even under dynamic loading and low-temperature conditions.

Key Features:

• Premium low hydrogen electrode for critical applications
• Highly crack-resistant weld metal with excellent toughness
• Radiographic-quality welds for superior inspection results
• Suitable for restrained joints and dynamic loading conditions
• Performs reliably in low-temperature environments

Applications:

Perfect for welding heavy, restrained joints in carbon-manganese steels. Widely used in pressure vessels, heavy structures, and fabrication requiring high-strength and impact resistance. Compatible with ASTM SA414/414M Gr.D, SA516/516M Gr.55/60/65/70, and IS 2062 steels. Trusted in industries such as shipbuilding, oil & gas, fabrication, and power generation.

Unit of Measurement 400gm  / 48rs

Price : 190/kg Exclusive of GST

Nexaweld Cutting Welding Electrode Nexa Cut Size(2.5/3.15/4/5mm*450)

Nexaweld Nexa Cut is a versatile, medium-coated cutting electrode engineered for fast, smooth cutting and piercing of a wide range of metals—without the need for gas, oxygen tanks, or special equipment. Designed for ease of use in all positions, this electrode cleanly cuts steels including carbon steel, stainless steel, cast iron, austenitic manganese steel, and non-ferrous metals. It leaves no oxidation or damage on the cut edge, preserving the base metal's structure.

• Gasless cutting—no oxygen or special equipment needed
• Cuts all types of ferrous and non-ferrous metals
• No oxidation or heat damage to cut edges
• Works in all welding positions
• Ideal for quick, on-site cutting tasks

Perfect for cutting and piercing carbon steels, low alloy steels, stainless steels, cast iron, copper, brass, bronze, aluminum, nickel, and other difficult-to-cut metal alloys. Widely used in maintenance, shipbuilding, heavy equipment repair, fabrication, and scrapyards.

Unit of Measurement 400gm  / 43rs

Price : 170/kg Exclusive of GST

Nexaweld Stainless Steel Welding Electrode E-430-15 Size(2.5/3.15/4/5mm*450)

Nexaweld E-430-15 is a premium basic-coated, low hydrogen welding electrode designed to deposit 17% Chromium weld metal. It offers excellent resistance to corrosion, oxidation, and scaling—performing reliably at elevated temperatures up to 900°C. This electrode ensures strong, stable arc performance with low spatter and a smooth weld finish, making it ideal for high-temperature and corrosion-prone environments.

• 17% Chromium weld deposit for excellent corrosion and oxidation resistance
• High temperature resistance up to 900°C
• Low hydrogen coating minimizes cracking and ensures clean welds
• Smooth arc with minimal spatter and easy slag removal
• Suitable for AC and DC welding

Ideal for welding AISI 430 stainless steels and castings of similar composition. Commonly used for surfacing carbon steels, low alloy steels, and chromium steels. Perfect for high-stress parts such as valves, impellers, turbine blades, and other components exposed to heat and corrosion in power, chemical, and process industries.

Unit of Measurement 400gm  / 138rs

Price : 550/kg Exclusive of GST

Nexaweld Stainless Steel Welding Electrode Size(2.5/3.15/4/5mm*450)

 ( ANY SS TO SS ) NEXA 680

Unit of Measurement 400gm  / 43

Price : 170/kg Exclusive of GST

Nexaweld Low Hydrogen Welding Electrode E-9018-B3 Size(2.5/3.15/4/5mm*450)

Nexaweld E-9018-B3 is a high-performance, low hydrogen iron powder electrode designed to produce a 2.25% Chromium, 1.0% Molybdenum weld deposit. Engineered for high-temperature service, this electrode delivers radiographic-quality welds with exceptional mechanical strength and creep resistance up to 575°C. It’s the go-to choice for welding alloy steels in critical pressure and thermal applications.

Key Features:

• Low hydrogen, iron powder electrode with 2.25 Cr - 1.0 Mo weld deposit
• Excellent creep and high-temperature strength up to 575°C
• Produces tough, radiographic-quality welds
• Smooth arc with minimal spatter and easy slag removal
• Suitable for AC and DC welding operations

Applications:

Ideal for welding 2.25 Cr - 1.0 Mo steels and castings used in high-pressure, high-temperature systems. Widely used in boilers, oil refineries, petrochemical plants, power generation units, and heavy-duty fabrication requiring long-term thermal and mechanical stability.

Unit of Measurement 400gm  / 75rs

Price : 300/kg Exclusive of GST

Nexaweld Low Hydrogen Welding Electrode E-7016 Size(2.5/3.15/4/5mm*450)

Nexaweld E-7016 is a high-quality, basic-coated low hydrogen electrode designed for welding medium and high tensile structural steels. It provides excellent arc stability, deep penetration, and sound radiographic-quality welds with superior mechanical strength. This electrode is also ideal for depositing buffer layers before hard surfacing, offering reliable performance even in demanding fabrication and repair tasks.

• Low hydrogen electrode for crack-resistant welds
• Excellent arc control with deep penetration
• Radiographic-quality welds with high mechanical strength
• Ideal for all-position welding
• Effective as a buffer layer before hard surfacing

Perfect for welding railway coaches, shipbuilding, oil storage tanks, earthmoving machinery, and heavy-duty structures. Also suitable for joining mild steel to cast iron and for applying buffer layers on cast iron bases before hard surfacing. Trusted in industries requiring durable, high-strength welds with minimal defects.

Unit of Measurement 400gm  / 45rs

Price : 178/kg Exclusive of GST

Nexaweld Low Hydrogen Welding Electrode E-7018-1 H4R Size(2.5/3.15/4/5mm*450)

Unit of Measurement 400gm  / 43

Price : 170/kg Exclusive of GST

Nexaweld Stainless Steel Welding Electrode E-308L Size(2.5/3.15/4/5mm*450)

Nexaweld E-308L is a premium quality, rutile-coated stainless steel welding electrode with extra low carbon content (19/9 grade). It is specially designed for high-performance welding, offering a smooth arc, stable operation, and excellent bead appearance with a bright, shiny finish. Highly recommended for stainless steel fabrication, especially in furniture manufacturing.

Key Features:

• Extra low carbon for superior corrosion resistance
• Smooth and stable arc with low spatter
• Excellent re-strike capability at low OCV
• Suitable for both AC and DC welding
• Ideal for thin sheet welding and aesthetic applications

Applications:

• Suitable for welding AISI grades 301, 302, 304L, and 308L stainless steels
• Widely used in manufacturing of stainless steel furniture and kitchen utensils
• Perfect for dairy equipment, chemical plants, fertilizer industries, and petrochemical machinery
• Recommended for industries requiring high-quality, clean welds and reliable joint strength

Unit of Measurement 400gm  / 113rs

Price : 450/kg Exclusive of GST

Nexaweld Mild Steel Welding Electrode Galvanized Size(2.5/3.15/4/5mm*450)

Unit of Measurement 400gm  / 43

Price : 170/kg Exclusive of GST

The BOSCH Plastic Welding Rod - Polyethylene Black (Model No: 1609201807) is a high-quality consumable designed for use in plastic welding applications. Manufactured by BOSCH, a trusted name in power tools and accessories, this welding rod is engineered for precision and durability, making it an ideal choice for both professional and DIY plastic repair tasks.

Crafted from polyethylene (PE), this rod is particularly well-suited for repairing or fabricating polyethylene plastic components such as car bumpers, water tanks, containers, canoes, kayaks, and other plastic items exposed to stress or impact. The material ensures a strong, flexible bond with excellent chemical and moisture resistance, which is crucial for long-lasting repairs.

This product comes in a black color, matching many standard plastic parts, which helps provide a clean and aesthetically pleasing finish. The rod is compatible with most hot air plastic welding tools and is especially efficient when used with BOSCH plastic welding systems. Its consistent diameter and smooth texture ensure even melting and reduce the risk of weld contamination.

Typically sold in standard lengths, the BOSCH polyethylene welding rod is easy to cut and handle, offering excellent weldability and minimal preparation. It’s ideal for use in the automotive, construction, and marine industries, or any environment requiring durable plastic repairs.

In summary, the BOSCH Model No. 1609201807 Polyethylene Welding Rod is a reliable, high-performance solution for plastic welding jobs, delivering superior results through quality material and engineering excellence. It reflects BOSCH’s commitment to providing dependable tools and accessories for precise and effective work.

• Compatible with light-duty staplers only
• TR45 takes all sizes and 0-tR40 takes 6,8,10 mm
• Chisel point tip type
• Package Contents: 1000 Pins
• Limited lifetime warranty offered on the product The Stanley 1-TRA208T Type A Staples are a dependable fastening solution designed for a wide range of home and professional applications. Each pack contains 1,000 high-quality staples, precision-engineered to ensure consistent performance and a secure hold. Crafted from durable silver-finished metal, these staples offer corrosion resistance and long-lasting strength, making them ideal for both indoor and outdoor use.

  Measuring 6mm in leg length, these staples are suitable for light to medium-duty stapling tasks, such as attaching fabrics, insulation, light wood, papers, or securing cables. They are compatible with most Stanley and other Type A staple guns, ensuring a smooth and jam-free operation during use. The chisel point design ensures easier penetration with minimal effort, reducing the risk of damage to materials.

  Whether you’re a DIY enthusiast, a hobbyist, or a professional tradesperson, the Stanley 1-TRA208T staples provide a reliable and efficient option for your stapling needs. Packaged in a convenient resealable box, they are easy to store and transport. Trusted by professionals for decades, Stanley continues to deliver products that meet the highest standards of quality and performance. Choose the 1-TRA208T staples for precision, durability, and consistent results every time.

The BOSCH Plastic Welding Rod (Model No: 1609201810) is a high-quality consumable designed specifically for plastic welding applications. Manufactured from durable polypropylene (PP), these rods are ideally suited for use in the repair, fabrication, or joining of plastic components, especially where strength, chemical resistance, and durability are required.

Polypropylene is a thermoplastic polymer known for its excellent resistance to acids, alkalis, and organic solvents, making these rods highly suitable for use in automotive, plumbing, and industrial environments. The BOSCH rods are colored grey, allowing for clean, professional-looking welds that blend well with similarly colored materials, often used in automotive bumpers, water tanks, and other equipment.

Each rod is manufactured to strict tolerances, ensuring consistent diameter and melting behavior for reliable and repeatable results during plastic welding processes. They are compatible with most hot air and extrusion plastic welding tools and are recommended for use with BOSCH's line of professional plastic welding equipment.

The model number 1609201810 represents BOSCH’s commitment to precision and quality in their consumables range. These rods are user-friendly and easy to handle, making them suitable for both professionals and DIY enthusiasts. When applied correctly, the resulting welds are strong, watertight, and capable of withstanding considerable mechanical stress and environmental exposu